References

forte
oasis
halsen

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2012).
N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2017).
N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2019).
N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2022).
N° 2 FULL CNC LINES for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivery 2023).

kfa

N° 1 FULL LINE with CLAMPS for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivery 2023).

alsys

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2022).

triumph thermo

N°1 FEEDHEAD CUTTING UNITS with TWO CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners. (Delivered 2021).

fondital

N° 1 LINE for grinding HEAD AND SIDE die-cast aluminum radiators (To be delivered 2021).
REVAMPING N° 3 FULL LINES for polishing, threading, assembly, and testing of die cast aluminum radiators (Destination FONDITAL Russian delivered 2018).
N° 15 FULL LINES for polishing, threading, assembly, and testing of die cast aluminum radiators (delivered from 1987 to 2010).
N°2 MACHINING LINES for "electric" model radiators (window cut and polishing).
N°4 SPECIAL MACHINES installed on the painting line for polishing the radiator packs prior to painting to eliminate impurities.
N°32 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°4 TEST TANKS for the painting department: These test tanks are used to test the painted packs prior to packaging. If any defects or dents are found on the pack after painting, the operator divides them using our SBA 800 machine, which removes the defective radiator and replaces it with a new one. After replacement, our SBA 800 reassembles the pack and for safety, retests it in this tank.
N°16 FEEDHEAD CUTTING UNITS with TWO CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners.
N°10 FEEDHEAD CUTTING UNITS with FOUR CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners.
N°2 SPECIAL BELTS with two levels in the pack packaging line.
N°3 COMPLETE THREADERS that replaced those previously supplied by our competitors, purchased by FONDITAL.
N°32 THREAD HEADS that we have inserted in our competitors threaders. Basically, we removed the heads previously purchased and we inserted our thread heads, with 3-year guarantee.
N°6 SPECIAL GROUPS for crimping radiators in the bottom area, these groups made in 2010 eliminate to process welding of the bottom from which WELDED becomes GRAFTED, it is therefore eliminates the welding.
N°1 FULL CNC LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2022).

nevinnomyssk

N°1 COMPLETE LINE for our NEW customer Nevinnomyssk Radiator Factory (Russia) for welding, thread grinding, assembly and testing of aluminum and bimetal die-cast radiators (Delivered 2022).

nova florida

N°2 COMPLETE LINES for mounting extruded radiators, that is, the die cast aluminum head is attached to the aluminum profile (lengths from 500 to 2000 mm), then the head is polished with four CNC units, thread, the insides washed, and the pack assembled, which is then tested up to 80 bar.
N°2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°2 TEST TANKS Special tanks for extruded radiators, for testing up to 80 bar and the possibility for testing radiators with gauges from 500 to 2000 mm, fully automatic.

radiatori 2000

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2020).

akfa

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2019).

Sarl Freses Melizi

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2018).

rusal

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2016).

botai

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2014).

vodoley

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2010).
N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2011).
N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2012).

R.T.C. Russia

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators (Delivered 2010).

idra

N° 2 FEEDHEAD CUTTING UNITS with TWO CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners.

tebowa nur

N° 1 FEEDHEAD CUTTING UNITS with TWO CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners.

maico

N° 4 FEEDHEAD CUTTING UNITS with TWO CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners.

frech

N° 4 FEEDHEAD CUTTING UNITS with TWO CAVITIES serving CASTING PRESSES, these machines divide the radiators from the runners.

industrie pasotti

N° 5 FULL LINES for polishing, threading, assembly, and testing of die cast aluminum radiators.
N°4 TEST TANKS for the painting department: These test tanks are used to test the painted packs prior to packaging. If any defects or dents are found on the pack after painting, the operator divides them using our SBA 800 machine, which removes the defective radiator and replaces it with a new one. After replacement, our SBA 800 reassembles the pack and for safety, retests it in this tank.
N°6 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°1 SPECIAL MACHINE for polishing packs: When the pack of radiators exits complete line and is to be reworked on the front side because it has imperfections, it is inserted in this machine. The machine uses polishing unit with a 120-grain belt that removes all imperfections.

biasi

N° 2 FULL LINES for polishing, threading, assembly, and testing of die cast aluminum radiatorsv.
N°4 TEST TANKS for the painting department: These test tanks are used to test the painted packs prior to packaging. If any defects or dents are found on the pack after painting, the operator divides them using our SBA 800 machine, which removes the defective radiator and replaces it with a new one. After replacement, our SBA 800 reassembles the pack and for safety, retests it in this tank.
N°2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°8 THREAD HEADS that we have inserted in our competitors threaders. Basically, we removed the heads previously purchased and we inserted our thread heads, with 3-year guarantee.

roca

N° 2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.

Alurad Srl

N° 1 FULL LINE for polishing, threading, assembly, and testing of die cast aluminum radiators.
N°2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°1 SPECIAL MACHINE installed on the painting line for polishing the radiator packs prior to painting to eliminate impurities.

I.M.A.

N°2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.

global

N°1 SPECIAL MACHINE for polishing packs: When the pack of radiators exits complete line and is to be reworked on the front side because it has imperfections, it is inserted in this machine. The machine uses polishing unit with a 120-grain belt that removes all imperfections.
N°2 COMPLETE TEST LINES for testing machined packs. It has a single structure that holds two packs in the tank at a time, with a sealing system up to 80 bar.
N°2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.

radial

N°2 SBA800 BENCHES in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°4 THREAD HEADS that we have inserted in our competitors threaders. Basically, we removed the heads previously purchased and we inserted our thread heads, with 3-year guarantee.
N°1 SPECIAL BELT for machining radiator heads, loaded and unloaded manually.

stiliac

N°1 FULL LINE for mounting extruded radiators. That is, the with two/three/four-way outlet die cast aluminum heads are attached to the iron or aluminum tubes (lengths from 500 to 2000 mm), then the head is polished with four CNC units, thread, the insides washed, and the pack assembled. Finally, they are tested up to 80 bar.
N°1 SBA800 BENCH in test area: These are benches that divide the packs that leak. The operator removes the leaky radiator, replaces it, and reassembles the pack. All on this bench.
N°1 TEST TANK for individual radiators: This is used to test individual radiators prior to their assembly to check for any leaks in the tubes for the glue. In this manner, radiators that already leak are not polished and assembled.